RAVIRAJ FOILS LIMITED manufactures soft, hard and half hard tagger foil with the following general specification. Final Specification are made as per agreed contract with the customer.

• ALUMINIUM FOIL :
  ...................................................................................................
  Hard or Soft (fully annealed) Aluminium alloy AA-1200 Aluminium foil conforming to Aluminium Association specification. The foil is coated, uncoated, without lubrication or Pre lubricated.
  
  

  Thickness Options
  0.03 mm ±8%	-0.035 mm ± 8%
  0.04 mm± 8%	-0.045 mm ±8%
  0.05 mm ± 8%	-0.06 mm ± 8%
  0.064 mm ±8%	-0.07 mm ± 8%
  0.075 mm ± 8%	-0.08 mm ± 8%
  0.1 mm ± 8%

  
  
• COATING /LUBRICATION :
  ...................................................................................................
  Colourless protective lacquer or lubricant confirming to be applicable regulations regarding direct contact with foods and drugs. Coloured lacquer can be provided if specified by the customer.
  
  

  Coating/ Lubrication
  Coating:	1.5 ± 0.5 GSM on each coated side
  Lubrication:	1 ± 0.2 GSM on each coated side

  
  
• CONFIGURATION :
  ...................................................................................................
  Tagger foils are available in reel form CORE MATERIAL AND CORE ID
  Aluminium of I.D 76 mm + 0.5 mm
  
  

  CORE LENGTH:	Equal to the width of web.
  REEL WIDTH:	As specified + 0.5 mm.
  REEL OD:	250 ± 10 mm with maximum two joints.
  SPLICES:	Butt type made with 25 mm pressure sensitive self adhesive tape.
  REEL WANDER:	Within ± 1 mm
  IDENTIFICATION:	Each reel shall be indentified with a ticket having reel no., thickness, width and manufacturing date.
  PACKING:	Packed in wooden crate with individual reels packed in cardboard box. Relevant markings are provided in crate and also on each of individual cartons.
  TEST CERTIFICATES:	Test certificate giving the actual observed values of different parameters would accompany the supplies.